Category : Uncategorized

TODO DCDC Switching Control Loop Disconnect battery under max power (62V input). green is the HS PWM signal. Tracking Conversion Efficiency Coil Current Vin=33, Vout=27.5, Iout=28A, Ipp=3.3A, fsw=40kHz=> L_dc = 34.7uH Iout = 7A, Ipp=2A (rising over time after 28A- test, temp?)=> L_dc = 132uH => core Al=250nH (22.5 turns) => similar to MS184125 wire ..

Read more

The Back Shed: Various aspects of home brew inverters EG8010 Nanoverter Grid-tie. schematic. code. Forums Picoverter link1 IRDAUP demo board EGD1000W V2 Push-Pull Quasi-Resonant using EGT003 ( EG1611 + EG21..

Read more

Home https://chiliproject.tetaneutral.net/projects/tetaneutral/wiki/relais_autonome Fugu Techbuilder’s FUGU Mppt (synchronous buck, 1000 W) 80V, 30A, 60uH Inductor, 39 kHz PWM, ESP32 Kicad Version: https://github.com/jharvey/Charge_Controller LibreSolar MPPT 2420 LibreSolar MPPT 2420-LC (20A), outdated, successor mppt-2420-hc LibreSolar MPPT 2420-HC github 80V Solar, 32V Battery, 20A, 53uH Inductor, STM32G431  DieBieMPPT makerPower™ MPPT Solar Charger https://github.com/danjulio/MPPT-Solar-Charger20V Solar, 14V Battery, 38 W MPPT ..

Read more

Low-side cascode By using 2 MOSFET, one high-voltage and one low-voltage in a cascode configuration, we can reduce the reverse recovered charge to the Qrr of the low-voltage device. This will reduce Qrr loss but add additional dead-time loss due to ~2x Vsd. The additional conduction loss is expected to be rather low, if the ..

Read more

Athome (tasmota, open source) https://de.athom.tech/ Tap P110 (no ESP32, no tasmota, no custom firmware, local API, HA integration through HACS) Shelly Plug MyStrom Kankun-SmartPlug Consumption M..

Read more

PV Input Overvoltage PV Input Reverse Polarity Battery Input Overvoltage Battery Input Reverse Polarity Over temperature High MOSFET Short This can lead to fatal damages of battery, and equipment connected to it, as solar panels are directly connected to the battery. Solution: Low MO..

Read more